![]() |
Regulations of Connecticut State Agencies (Last Updated: June 14,2023) |
![]() |
Title14 Motor Vehicles. Use of the Highway by Vehicles. Gasoline |
![]() |
SubTitle14-275a-1_14-275a-87. Minimum Requirements for Type II (Type 2) School Bus Construction and Equipment |
Sec.14-275a-87. Interpretation
-
(a) Any references in sections 14-275a-21 to 14-275a-87, inclusive, of the Regulations of Connecticut State Agencies to any Federal Motor Vehicle Safety Standard, SAE Standard, procedure or recommended practice, American Society for Testing Material Procedure, Code of Federal Regulations or other nationally accepted standard, procedure or regulation shall be deemed to include any revision to such standard, procedure or regulation as may be subsequently adopted. Any dimensions specified in sections 14-275a-x1 to 14-275a-x65, inclusive, of the Regulations of Connecticut State Agencies shall comply within the following limits:
1. Measurements specified in whole numbers with no decimal point specified shall be rounded either up or down to the next whole number in accordance with standard engineering practice.
2. Measurements specified as decimals or whole numbers with a decimal shall be rounded to the least significant digit specified.
3. Tolerances specifically noted in the references mentioned in subsection (a) of this section shall prevail.
(Adopted effective May 2, 2007)